Loading Ramp with Double Support Bar and Support Legs (2200mmx285mm)
Lightweight aluminium heavy-duty folding loading ramps with cut-out gripping system. These folding loading ramps include a double support bar and adjustable support legs to increase durability. Suitable for motorbikes, lawnmowers, ATVs/quad bikes and other wheeled garden machinery. Slightly curved for better ground clearance. Each ramp has a capacity of 680 kg (1360kg for the pair).
The support bar legs can be adjusted from 340mm up to 425mm.
Please note that these ramps are not suitable for single axle or tracked machines or vehicles, nor are they suitable for casters or solid wheels
- Comes with a double support bar which adds extra strength and durability
- Folding ramp design for easy storage and transportation
- Slightly curved for better ground clearance
- Minimum tire width 10cm
- Made of lightweight aircraft-grade aluminum (type 6005A)
- Robot welded for strong and durable construction
- Lightweight for easy handling
- Angled foot, this allows easy access to the ramp
- Each ramp has a capacity of 680 kg, the capacity of the pair is 1360 kg
- Each ramp is 2200mm long x 285mm wide
- Folded length 1100mm
- Suitable for a load height of 520mm - 666mm
- The support bar legs can be adjusted from 340mm up to 425mm.
- Straps are supplied with the ramps
- Use of support legs is required to achieve the stated capacity
- All images shown are for illustrative purposes only. Actual product may vary due to product improvement
- These ramps must be used with the support legs
- All images shown are for illustrative purposes only. Actual product may vary due to product improvement
Please note that these ramps are not suitable for single axle or tracked machines or vehicles, nor are they suitable for casters or solid wheels
Please note these ramps are designed for domestic use only, these are not suitable for industrial use.
SKU | TRP700-L Conf |
---|---|
Capacity (kg) | 680-1360 |
Folded Length (mm) | 1100 |
Height (mm) | 50 |
Length (mm) | 2200 |
Max Load Height (mm) | 666 |
Min. Load Height (mm) | 520 |
Weight (kg) | 17.6 |
Weight per Ramp (kg) | 8.8 |
Width (mm) | 285 |
One Year Warranty | Yes |
Easy to Fit | Yes |
Ramp Capacity, Length & Load Height
This guide should help you gauge how long a ramp you require, so if you're in any doubt read the details below. If you still have questions after reading, feel free to give us a call. The crucial thing to know is your load height.
Load Height: this is the vertical measurement from the ground to where you rest the ramp onto.
Guide to the maximum load height is shown in the product description/table, please note the minimum Load Height will be 5% below the maximum height stated on the ramp, to calculate use (maximum load height - 5% = minimum load height).
For vehicle ramps EU guidelines recommend that no ramps with a gradient greater than 30% or 1:3.3 should be used. Essentially the load height x 3.3, gives you your ramp length. Furthermore no TUV Certified Ramp is designed to exceed this gradient. Going over this gradient is can cause accident, injury or death and may invalidate the warranty.
Please check the wheelbase measurement of the machine you are loading is suitable for the capacity the ramp can take based on the wheelbase measurement advised. To check your wheelbase, look at the vehicle from side view, the distance between the centre of front wheel and rear wheel (rim centre) is your wheelbase.
For machines with an unbalanced weight distribution such as, scissors lifts, paving machinery, steel tracked machinery and machines with low ground clearance we would advise you contact us first, so we can check and advise on the most suitable solution.
For loading cars and other vehicles with either a) Low ground clearance b) Front and/or Rear overhang a gentler gradient is recommended (this will vary depending upon the vehicle). Please also note that most forklifts and pallet trucks are not built to be used on slopes. Please check the manual for the gradient information.
Further information can be seen in this blog article here
Which wheelchair ramp length? Use our ramp length calculator! Learn more
Customer Reviews
Loading Ramp with Double Support Bar and Support Legs (2200mmx285mm)
Overall Rating 5 out of 5